SN65HVD379DG4 - 

制造商：

TEXAS INSTRUMENTS TEXAS INSTRUMENTS

制造商产品编号：

SN65HVD379DG4

仓库库存编号：

1390639

技术数据表：

(EN)

The SN65HVD379DG4 is a differential Line Driver and Differential-input Line Receiver for use with chassis-to-chassis interconnections. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. It is designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11 and ISO 8482:1993 standard-compliant devices. This differential bus driver and receiver is monolithic integrated circuit designed for full-duplex bi-directional data communication on multipoint bus-transmission lines at signalling rate up to 25Mbps. It is fully enabled with no external enabling pins. The 1/2 unit load receiver has a higher receiver input resistance. This results in lower bus leakage currents over the common-mode voltage range and reduces the total amount of current that an RS-485 driver is forced to source or sink when transmitting.

• Balanced receiver thresholds
• 1/2 Unit-load (up to 64 nodes on the bus)
• Thermal shutdown protection
• Power-up/down glitch-free bus inputs and outputs
• High input impedance with low VCC
• Monotonic outputs during power cycling
• Bus-pin ESD protection 15kV HBM
• Bus-fault protection of -7 to 12V
• 5V Tolerant inputs
• Green product and no Sb/Br

参考价格及参考库存