XTR300AIRGWT - 

制造商：

TEXAS INSTRUMENTS TEXAS INSTRUMENTS

制造商产品编号：

XTR300AIRGWT

仓库库存编号：

2323338

技术数据表：

(EN)

The XTR300AIRGWT is an industrial analog Current/Voltage Output Driver for PLC output programmable circuit. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required. The separate driver and receiver channels provide flexibility. The Instrumentation Amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage output mode, a copy of the output current is provided, allowing calculation of load resistance. The digital output selection capability, together with the error flags and monitor pins, make remote configuration and troubleshooting possible. Fault conditions on the output and on the IA input as well as over-temperature conditions are indicated by the error flags. The monitoring pins provide continuous feedback about load power or impedance.

• Short-or open-circuit fault indicator pin
• No current shunt required
• Output disable for single input mode
• Thermal protection
• Overcurrent protection
• Separate driver and receiver channels
• Designed for testability
• 0.1% Maximum non-linearity
• 17.5V Auxiliary output voltage
• 0.12% Maximum span error