The TPS63000DRCRG4 is a 96% Buck-boost Converter with 1.8A current switches that provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery or a one-cell Li-ion or Li-polymer battery. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800mA. The output voltage is programmable using an external resistor divider or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
- Fixed and adjustable output voltage options from 1.2 to 5.5V
- Up to 96% efficiency
- 1200mA Output current at 3.3V in step-down mode (VIN = 3.6 to 5.5V)
- Up to 800mA output current at 3.3V in boost mode (VIN >2.4V)
- Automatic transition between step-down and boost mode
- Less than 50μA device quiescent current
- Power-save mode for improved efficiency at low output power
- Forced fixed frequency operation and synchronization possible
- Load disconnect during shutdown
- Over-temperature protection
- Green product and no Sb/Br
电源管理, 便携式器材, 音频, 通信与网络, 医用, 发光二极管照明
(EN)
