The TPS62730EVM-726 is an evaluation module helps designers to evaluate the operation and performance of the TPS62730 step down converter. The converter is designed to deliver up to 100mA of continuous current to the output. The converter can be switched into bypass mode by grounding the ON/BYP pin or automatically with the input voltage falling to the output regulation voltage. The TPS62730 device is a high frequency synchronous stepdown dc to dc converter optimized for ultralow power wireless applications. The device is optimized to supply low power wireless sub-1GHz and 2.4GHz RF transceivers. The TPS62730 reduces the current consumption drawn from the battery during TX and RX modes by a highly efficient stepdown voltage conversion. It provides up to 100mA output current and allows the use of tiny and low cost chip inductors and capacitors. This device supports most Li ion primary battery chemistries, with an input range of 1.9 V to 3.9 V dc.
Input voltage ranges from 1.9V to 3.9V
TPS62730 features an ultralow-power bypass mode with a typical 30 nA current consumption
DC/DC quiescent current is typically 25μA
Internal feedback divider disconnect
Typically 2.5R bypass switch between VIN and VOUT
Automatic transition from DC/DC to bypass mode
Up to 3MHz switch frequency, Up to 95% DC/DC efficiency
Output peak current up to 100mA
Fixed output voltage options 2.1V, 2.05V and 1.9V
Small external output filter components 2.2μH/ 2.2μFv
(EN)
