The TPS62162DSGT is a 1A Synchronous Step-down Converter with DCS-control? optimized for applications with high power density. A high switching frequency of typically 2.25MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control topology. It is ideally suited for systems powered from either a Li-ion or other batteries as well as from 12V intermediate power rails. It supports up to 1A continuous output current at output voltages between 0.9 and 6V (with 100% duty cycle mode). Power sequencing is also possible by configuring the Enable and open-drain Power Good pins. In power save mode, the device draws quiescent current of about 17μA from VIN. Power save mode, entered automatically and seamlessly if load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2μA.
- DCS-Control? topology
- Fixed output voltage versions
- Seamless power save mode transition
- 17μA Typical quiescent current
- Power good output
- 100% Duty cycle mode
- Short-circuit protection
- Over-temperature protection
- Green product and no Sb/Br
电源管理, 信号处理, 便携式器材, 通信与网络, 计算机和计算机周边, 成像, 视频和目视, 多媒体
(EN)
