The TPS54218EVM-511 is an evaluation module designed to evaluate the TPS54218 SWIFT DC/DC converter. The TPS54218 dc/dc converter is designed to provide up to a 2A output from an input voltage source of 2.95V to 6V. This evaluation module is designed to demonstrate the small PCB areas that may be achieved when designing with the TPS54218 regulator, and does not reflect the high efficiencies that may be achieved when designing with this part. The switching frequency is set at a nominal 1000KHz. The high side and low side MOSFETs are incorporated inside the TPS54218 package allowing for compact designs with minimal external circuitry. The low drain to source on resistance of the internal MOSFETs allows the TPS54218 to achieve high efficiencies and helps to keep the temperature low at high output currents. The TPS54218 is a full featured device including undervoltage lockout, adjustable slow start timing, adjustable switching frequency, enable, and power good functions.
- Two 30mR (typical) MOSFETs for high efficiency at 2A loads
- 200KHz to 2MHz switching frequency
- 0.8V ± 1% voltage reference over temperature
- Synchronises to external clock
- Adjustable slow start/sequencing
- UV and OV power good output
- Low operating and shutdown quiescent current
- Safe start up into Pre biased output
- Cycle by cycle current limit, thermal and frequency fold back protection
- Thermally enhanced 3mm × 3mm 16 pin QFN
电源管理, 嵌入式设计与开发, 信号处理, 通信与网络, 无线, 光纤
(EN)
