The TPS40210EVM is an evaluation module for TPS40210, a fixed frequency (600kHz) non synchronous boost converter providing fixed 24V output at up to 2A from a 12V input bus. The evaluation module is designed to start up from a single supply, so no additional bias voltage is required for start up. The module uses the TPS40210 non synchronous current mode control boost controller with integral N-channel FET driver. The evaluation module is designed to use a regulated 12V (+10% / -20%) bus to produce a regulated power rail at 24V at up to 2A of load current each. The evaluation module is designed to demonstrate the TPS40210 in a typical 12V bus system while providing a number of test points to evaluate the performance of the TPS40210 in a given application. The evaluation module can be modified to other input or output voltages by changing some of the components.
- TPS40210EVM is designed to use a regulated 12V (+10% / -20%) bus
- 24V fixed output voltage, adjustable with resistor change
- 2Adc steady state output current
- 600kHz switching frequency single SO 8 switching MOSFET and rectifier diode
- Double sided two active layer PCB with all components on top side
- Active converter area of less than 2.5square inch < 1.15 inch x 2.15 inch
- Convenient test points for probing switching waveforms and non-invasive loop response testing
电源管理, 消费电子产品
(EN)
