The TLC5943PWP is a 16-channel 16-bit PWM LED Driver with 7-bit global brightness control. Each channel is individually adjustable with 65,536 enhanced spectrum pulse-width modulated (PWM) steps controlled by greyscale (GS) data. All output drivers are adjustable with 128 constant sink current steps at same value controlled by brightness control (BC) data. Both GS data and BC data are writable via a serial interface port. The maximum current value of all 16 channels can be set by a single external resistor. The TLC5943 has two error detection circuits for LED open detection (LOD) and a thermal error flag (TEF). LOD detects a broken or disconnected LED and shorted LED to GND during the display period. TEF indicates an over-temperature condition, when a TEF is set, all output drivers are turned off. When the TEF is cleared, all output drivers are restarted.
16 channels, constant-current sink output
16-bit (65,536 steps) Greyscale control with enhanced spectrum (ES) PWM
7-bit (128 steps) Global brightness control for all channels with sink current
Constant-current accuracy
CMOS level I/O
30MHz Data transfer rate
33MHz Greyscale control clock
Auto display repeat
Auto data refresh
Continuous base LED open detection (LOD)
Automatic thermal shutdown at high temperature conditions
Thermal error flag (TEF)
Noise reduction (4-channel grouped delay to prevent inrush current)
(EN)
