The SN65HVD179DG4 is a differential Line Driver and Differential-input Line Receiver operates with a 5V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. It is designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11 and ISO 8482:1993 standard-compliant devices. The differential bus driver and receiver is monolithic integrated circuit designed for full-duplex bi-directional data communication on multipoint bus-transmission lines at signalling rate up to 25Mbps. It is fully enabled with no external enabling pins. The 1/2 unit load receiver has a high receiver input resistance. This results in lower bus leakage currents over the common-mode voltage range and reduces the total amount of current that a 485 driver is forced to source or sink when transmitting.
- Balanced receiver thresholds
- 1/2 Unit-load (up to 64 nodes on the bus)
- Thermal shutdown protection
- Power-up/down glitch-free bus inputs and outputs
- Designed for RS-422 and RS-485 networks
- 15kV HBM Bus-pin ESD protection
- -7 to 12V Bus-fault protection
- Green product and no Sb/Br
电机驱动与控制, 计量, 安全, 自动化与过程控制, 建筑自动化
(EN)
