The SM3320-BATT-EV/NOPB is an evaluation board for SM72295 and SM72442. The SM72442 MPPT digital controller and SM72295 photovoltaic full bridge drivers are designed to control high efficiency DC/DC conversion used in photovoltaic applications. The reference design is meant to provide support for a wide variety of implementations, however, unless otherwise noted, this reference design system is shown charging a 12V commercial automotive lead acid battery. If the battery voltage is very low, a slow charge current is applied and limited until the voltage rises above a preset threshold value Vt. The full charge current is then applied. Once full charge is detected on the voltage of the battery, the system switches to a floating charge and maintains the battery voltage at a fixed threshold. At any time, the system will run in MPPT mode if the available power is lower than the power required to achieve voltage or current regulation.
- 12V lead acid battery
- 15V to 45V input voltage range
- 11A max input current
- MPPT algorithm for optimized photovoltaic applications
- Up to 9A charging current
- Reverse current protection
- Trickle charge and fast charge mode
- Up to 98 percent converter efficiency
- 14.2V max charge voltage, 13.5V floating voltage
- Output voltage set points can be re programmed
车用, 电源管理, 替代能源
(EN)
