The OPA548T is a high-voltage and high-current Operational Amplifier, ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high-output voltage and current. The OPA548T device operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground. The OPA548T device is internally protected against over-temperature conditions and current overloads. In addition, the OPA548T device was designed to provide an accurate, user-selected current limit. Unlike other designs, which use a resistor in series with the output current path, the OPA548T device senses the load indirectly. This allows the current limit to be adjusted from 0 to 5A with a resistor and potentiometer or controlled digitally with a voltage-out or current-out DAC. The enable/status (E/S) pin provides two functions.
- 3A Continuous, 5A peak high-output current
- Wide output voltage swing
- Thermal shutdown and adjustable current limit protection
- Output disable control
- Thermal shutdown indicator
- 10V High slew rate
- Low quiescent current
- Green product and no Sb/Br
电机驱动与控制, 电源管理, 测试与测量, 信号处理, 音频
(EN)
