The MAX3237EIDBR is a RS-232 multichannel Line Driver/Receiver consists of five line drivers, three line receivers and a dual charge-pump circuit with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. This device operates at data signalling rates of 250kbps in normal operating mode (MBAUD = GND) and 1Mbps when MBAUD=VCC. The driver output slew rate is a maximum of 30V/μs. The MAX3237E transmitter is disabled and the outputs are forced into high-impedance state when the device is in shutdown mode (SHDN=GND) and the supply current falls to less than 1μA. Also, during shutdown, the onboard charge pump is disabled, V+ is lowered to VCC and V- is raised toward GND.
- 5 Line drivers, 3 line receivers and dual charge-pump circuit
- Designed to be interchangeable with Maxim MAX3237E
- Latch-up performance exceeds 100mA per JESD 78, class II
- 13V Supply voltage difference
- ±60mA Short-circuit output current
- Green product and no Sb/Br
便携式器材, 计算机和计算机周边, 消费电子产品, 无线, 通信与网络
(EN)
