The LM629M-8 is a dedicated Motion-control Processor designed for use with a variety of DC and brushless DC servo motors and other servomechanisms which provide a quadrature incremental position feedback signal. The parts perform the intensive, real-time computational tasks required for high performance digital motion control. The host control software interface is facilitated by a high-level command set. It has an 8-bit output which can drive either an 8-bit or a 12-bit DAC. The components required to build a servo system are reduced to the DC motor/actuator, an incremental encoder, a DAC and a power amplifier. An LM629-based system is similar, except that it provides an 8-bit PWM output for directly driving H-switches. It incorporates an SDA core processor and cells designed by SDA.
- 32-bit Position, velocity and acceleration registers
- Programmable digital PID filter with 16-bit coefficients
- Programmable derivative sampling interval
- 8-bit Sign-magnitude PWM output data
- Internal trapezoidal velocity profile generator
- Velocity, target position and filter parameters may be changed during motion
- Position and velocity modes of operation
- Real-time programmable host interrupts
- 8-bit Parallel asynchronous host interface
- Quadrature incremental encoder interface with index pulse input
- Green product and no Sb/Br
电机驱动与控制, 信号处理
(EN)
