The DRV8800PWP is a DMOS full-bridge Motor Driver contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880xis capable of peak output currents up to ±2.8A and operating voltage up to 36V. An internal charge pump generates the needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for under-voltage, charge pump fault, overcurrent, short-to-supply, short-to-ground and over-temperature. Fault conditions are indicated through the nFAULT pin.
- Low RDS(on) MOSFETs (0.4R typical)
- Low-power sleep mode
- 100% PWM supported
- 3A Overcurrent threshold
- 3μs Overcurrent deglitch time
- 1.2ms Overcurrent retry time
- Green product and no Sb/Br
电机驱动与控制, 计算机和计算机周边, 自动化与过程控制, 机器人
(EN)
