MOD-USB-RS232 is module board with PIC18F14K50 microcontroller. It is a simple USB to UART converter that features UEXT. It can be used to add Virtual Com Port to other Olimex's module, or development board, with UEXT, but without Com Port. The board can be configured in both device and host mode, depending on jumpers 3_RX/3_TX and 4_TX/4_RX. For using MOD-USB-RS232 with some of our modules, it's jumpers has to be configured for host mode. For using MOD-USB-RS232 with some of our development boards, it's jumpers has to be configured for device mode.
- PIC18F14K50 20-Pin USB Flash Microcontrollers with nanoWatt XLP Technology
- Mini USB connector
- Status LED
- Male UEXT connector plus 10 pin cable for it
- RESET circuit
嵌入式设计与开发, 通信与网络, 信号处理
(EN)
