The NC7FX from Neutrik is a 7 pole female XLR cable connector. This industry standard XLR cable connector is easy to assemble with only four parts and no screws. It has compact design with sturdy die-cast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Boot with rubber gland gives high protection against bending stresses. The coloured rings and boots available for coding and marking. The cable outer diameter of this XLR connector ranges from 3.5mm to 8mm.
Long lasting and durable
Contact resistance is less than or equal to 3mohm
Rated voltage is less than 50V and rated current per contact is 5A
UL ECBT2.E135070 certified
Maximum wire size is 18AWG (1mm2) and greater than 1000 mating cycles
Silver plated brass solder contacts, polyurethan boot and polyamide insert material
Steel latch lock and zinc die-cast shell with nickel plating
Flammability rating meets UL94 HB
IP 40 protection class and IEC 61076-2-103 compliant
(EN)
