The SST26VF032BA-104I/SM is a Serial Quad I/O? (SQI?) family of Flash-memory Device features a six-wire, 4-bit I/O interface that allows for low-power and high-performance operation. The SST26VF032BA also support full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. System designs using SQI flash devices occupy less board space and ultimately lower system costs. All members of the 26 Series, SQI family are manufactured with proprietary, high-performance CMOS SuperFlash? technology. The split-gate cell design and thick-oxide tunnelling injector attain better reliability and manufacturability compared with alternate approaches. The SST26VF032BA significantly improve performance and reliability, while lowering power consumption. This device write (Program or Erase) with a single power supply of 2.3 to 3.6V. The total energy consumed is a function of the applied voltage, current and time of application.
Single voltage read and write operations
Serial interface architecture
High speed clock frequency
Burst modes - Continuous linear burst and 8/16/32/64 Byte linear burst with wrap-around
Superior reliability - 100000 cycles endurance and greater than 100-year data retention
Low power consumption
Fast erase time
Page-program - 256 bytes per page in x1 or x4 mode
End-of-write detection - Software polling the BUSY bit in status register
