RN-XV-EK1 is an evaluation kit for the RN171XV module based on Roving Networks' robust RN171 WiFi module. The board connects to a PC via a standard USB cable and provides two pushbutton switches to control WPS mode and to reset the module. The board has connectors to drop in the RNXV, as well as headers that allow wires access to the RN-XV signals. Based on a pseudo standard footprint often found in embedded applications, the RN-XV is a 802.11 b/g solution for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP based platform without redesigning their existing hardware. This module incorporates an 802.11 b/g radio, a 32bit SPARC processor, a TCP/TP stack, a real time clock, a crypto accelerator, power management unit and an analog sensor interface. The module is pre loaded with firmware to simplify integration and minimize applications development time.
- Supports several antenna options, depending on the RN171XV module selected
- WPS pushbutton for easy configuration
- Reset pushbutton wakes the module
- Standard USB connector
- Hardware interface (USB via FTDI chipset)
工业, 计量, 传感与仪器, 机器人, 替代能源, 通信与网络