The PIC18F2480-I/SP is an Enhanced Flash Microcontroller with ECAN? technology, 10-bit A/D and nanoWatt technology. The PIC18F2480 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance and power sensitive applications. The PIC18F2480 family incorporates a range of features that can significantly reduce power consumption during operation. The PIC18F2480 device include an internal oscillator block which generates two different clock signals, either can be used as the microcontroller's clock source. This may eliminate the need for external oscillator circuits on the OSC1 or OSC2 pins. The PIC18F2480 microcontroller can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming voltage.
Power-managed modes - Run, idle and sleep
Flexible oscillator structure - Secondary oscillator using Timer1 at 32kHz, fail-safe clock monitor
Flash/data EEPROM retention of >40 years
Self-programmable under software control
Priority levels for interrupts
8 x 8 Single-cycle hardware multiplier
Programming? (ICSP?) via two pins
In-Circuit Debug (ICD) via two pins
Peripheral - Three external interrupts and one capture/compare/PWM (CCP) module
ECAN technology module - Message bit rate up to 1Mbps and automatic remote frame handling
(EN)
