The MCP1416T-E/OT is a small footprint low-side MOSFET driver capable of supplying 1.5A peak output current. It is a non-inverting low-side driver meaning that when the input signal is high, the output signal is also high. Although the name of the device is MOSFET driver, these devices have other applications besides driving the gate of a MOSFET. This device is also used to direct drive a small DC motor, act as buffers for high speed data lines and level translators to interface low voltage to high voltage.
Highly Resistant to Ground Bounce and Negative Input Thresholds Latch-up Immunity
Matched Rise and Fall Times and Matched Propagation Delay Times
Input Will Withstand Negative Swings of up to 5V
1.5A Typically High Peak Output Source/Sink Current
470pF in 10.0ns (Typical) and 1000pF in 20.0ns (Typical) High Capacitive Load Drive Capability
Low Output Impedance
850μA (with Logic "1" Input) and 100μA (with Logic "0" Input) Low Supply Current
Can Withstand up to 0.5A of Output Reverse Current
4kV ESD Protected
Low Shoot-through/Cross-conduction Current in Output Stage
Immune to Double Pulsing the Output with Slow Ramping Input Signals
