The MA240025-2 is a plug-in module for 144-pin PIC24EP512GU814-I/PT graphics device. It is intended to be used with the explorer board (DM240001 or DM240002) for general-purpose applications or for graphics application development with the addition of the graphics PICtail plus daughter board (AC164127). These PIC24E devices contain a peripheral pin select (PPS) feature that allows most of the Digital peripherals to be remapped to use any number of pins on the device. Because the PIC24EP512GU814 device has 144-pins and the PIM socket can only route 100 pins down to the explorer 16 board, 28 I/O pins are multiplexed using zero ohm resistors. Designers can utilize the PPS feature and modify the functionality by adding or removing these resistors. In addition, 32 I/O pins are routed to test points on top of the PIM PC board to provide full access to available pins.
- Up to 60MIPS operation with modified Harvard architecture
- 16x16 integer multiply operations
- 32/16 and 16/16 integer divide operations, On-chip flash and SRAM
- Up to 4Kbytes dual ported DMA buffer area (DPSRAM) to store data transferred via DMA
- Hardware real-time clock and calendar data converter interface (DCI) module
- Supports I2S and AC'97 protocols
- USB on-the-go (OTG)
- Four modules of 4-wire SPI, two modules of I2C and four modules of UART
- Two modules of enhanced CAN (ECAN ) 2.0B active
- Parallel master slave port (PMP/EPSP)
消费电子产品, 工业, 医用, 车用, 通信与网络, 多媒体, 传感与仪器, 音频, 电机驱动与控制, 建筑自动化
(EN)
