The MAX7030HATJ+ is a low cost, 433.92MHz ASK transceiver with fractional-N PLL in 32 pin TQFN package. This crystal based, fractional-N transceiver is designed to transmit and receive ASK/OOK data at factory preset carrier frequencies of 433.92MHz with data rates up to 66kbps (NRZ encoded). This device generates a typical output power of +10dBm into a 50 ohm load and exhibits typical sensitivity of -114dBm. It features separate transmit and receive pins (PAOUT and LNAIN), provides an internal RF switch that can be used to connect transmit and receive pins to a common antenna. IC transmit frequency is generated by a 16bit, fractional-N, phase locked loop (PLL), while receiver's local oscillator (LO) is generated by an integer-N PLL. This hybrid architecture eliminates the need for separate transmit and receive crystal reference oscillators because the fractional-N PLL is preset to be 10.7MHz above the receive LO.
- Single supply operation range is +2.1V to +3.6V or +4.5V to +5.5V
- Operating temperature range from -40°C to 125°C
- Single crystal transceiver, factory preset frequency (no serial interface required)
- ASK/OOK modulation, +10dBm output power into 50 ohm load
- Integrated TX/RX switch, image rejection is 46dB & < 12.5mA transmit mode current
- Integrated transmit and receive PLL, VCO and loop filter
- Selectable IF bandwidth with external filter
- Fast-on startup feature, < 250μs , receive mode current is < 6.7mA
- Shutdown current is < 800nA
通信与网络, 安全
(EN)
