The MAX6356LSUT+T is a triple voltage microprocessor (μP) supervisory circuit in 6 pin SOT-23 package. This μP supervisory circuit maintains system integrity by alerting the μP to fault conditions. The microprocessor (μP) supervisor with multiple reset voltages significantly improves system reliability and accuracy compared to separate IC's or discrete components. If any input supply voltage drops below its associated preset threshold all reset output is asserted. The output reset state is guaranteed to remain viable while either VCC1 or VCC2 is above +1V.It offer an additional voltage monitor input to monitor a third voltage. This device is used in computers, controllers, intelligent instruments and multivoltage systems.
Supply voltage range is 1V to 5.5V
Operating temperature range from -40°C to 85°C
Precision monitoring of multiple +1.8V, +2.5V, +3.0V, +3.3V and +5V power supply voltages
Precision factory set power supply reset thresholds
Supply current is 20μA
Manual reset input
Push- pull output (VCC1)
Minimum power-on-reset pulse width is 100ms, power-supply transient immunity
Debounced TTL/CMOS compatible, fully guaranteed over temperature
Low cost, RESET(complementary) valid to VCC1 = 1V or VCC2 = 1V
(EN)
