The MAX5721EUA+ is a 10bit, low power, dual, voltage output DAC with serial interface in 8 pin μMAX package. The wide supply voltage range and 112μA supply current accommodate low power and low voltage applications. DAC outputs employ on-chip precision output amplifiers that swing rail to rail. The MAX5721's reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system's total power consumption. The 20MHz, 3-wire SPI, QSPI, MICROWIRE and DSP-compatible serial interface saves board space and reduces the complexity of opto and transformer isolated applications. The MAX5721 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100Kohm resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5721's software-controlled power-down reduces supply current to less than 0.3μA.
- Supply voltage range is 2.7V to 5.5V
- Operating temperature range from -40°C to 85°C
- Fast 20MHz 3-wire SPI/QSPI/MICROWIRE and DSP-compatible serial interface
- Schmitt triggered inputs for direct interfacing to optocouplers
- Software selectable output loads (1Kohm, 100Kohm or high impedance) in power-down mode
- Rail to rail output buffer
信号处理, 便携式器材
(EN)
