The MAX5104CEE+ is a dual, voltage output, 12bit digital to analogue converter (DAC) with serial interface in 16 pin QSOP package. This low power DAC is easily configured with a 3-wire serial interface. The device includes a 16bit data-in/data-out shift register and each DAC has a double buffered input composed of an input register and a DAC register. The trimmed internal resistors produce an internal gain of +2V/V that maximizes output voltage swing. The amplifier's offset-adjust pin allows for a DC shift in the DAC's output. Both DACs use an inverted R-2R ladder network that produces a weighted voltage proportional to the input voltage value. Each DAC has its own reference input to facilitate independent full-scale values. It is used in digital offset and gain adjustment, microprocessor-controlled systems, motion control and automatic test equipment (ATE).
Supply voltage range is 4.5V to 5.5V
Operating temperature range from 0°C to 70°C
12bit dual DAC with internal gain of +2V/V
Rail to rail output swing, digital crosstalk of 5nVs
Settling time is 12μs, reference 3dB bandwidth of 300KHz at input code = 1FFE hex
Low quiescent current of 500μA (normal operation), 2μA (power-down mode)
SPI/QSPI/MICROWIRE compatible
Power-on reset clears registers and DACs to zero
Maximum PSRR of 600μV/V at 4.5V <= VDD <= 5.5V & SINAD of 75dB at input code = 1FFE hex
INL is ±4LSB, DNL is ±1LSB and adjustable output offset
(EN)
