The MAX500ACPE+ is a CMOS, quad, voltage output 8bit digital to analogue converter (DAC) in 16 pin DIP package. This serial DAC includes four output buffer amplifiers and input logic for an easy to use two or three wire cascadable serial interface. In a system with several MAX500A devices only one serial data line is required to load all the DACs by cascading them. The MAX500A contains double buffered logic and 10bit shift register that allows all four DACs to be updated simultaneously using one control signal. There are three reference inputs so the range of two of DACs can be independently set while other two DACs track each other. The device achieves 8bit performance over the full operating temperature range without external trimming. It is used in minimum component count, analogue systems, digital offset/gain adjustment, arbitrary function generators and automatic test equipments.
Supply voltage range from 11.4V to 16.5V, 14.25V to 15.75V
Operating temperature range from 0°C to 70°C
Supports I2C interface
Positive supply current of 10mA at TA = +25°C with single supply
Buffered voltage outputs, double buffered digital inputs
Microprocessor and TTL/CMOS compatible
No external adjustments is required
Total unadjusted error of ±1LSB and full scale error of ±1/2LSB with single supply
Relative accuracy of ±1/2LSB and differential nonlinearity of ±1LSB (monotonic) with single supply
Voltage output slew rate of 8V/μs with dual supply
