The MAX4906EFELB+T is a high /full speed USB 2.0 switch in 10 pin μDFN package. This ESD -protected analogue switch combines the low on capacitance (CON) and low on-resistance (RON) necessary for high performance switching applications. Device is designed for USB 2.0 high speed applications at 480Mbps. This switch will also handle all requirements for USB low and full speed signalling. It features two single-pole/double-throw (SPDT) switch Device is fully specified to operate from a single +3V to +3.6V power supply and is protected against a +5.5V short to all analogue inputs (COM_, NC_,NO_). This feature makes it fully compliant with USB 2.0 specification of +5.5V fault protection. It features a low threshold voltage and a +1.4V VIH, permitting it to be used with low voltage logic. It is used in GPS, notebook computers, relay replacements, USB switching, Ethernet switching, video switching, Bus switches and T3/E3 switches for redundancy protection.
- Quiescent supply current is 1000μA (max) at V+ = 3.6V, VIN = 0
- Operating temperature range from -40°C to 85°C
- 500MHz (typ) -3dB bandwidth
- Low bit to bit skew <= 20ps
- Low supply current 3μA (max) in standby
- ±15kV (human body model) ESD protection (on COM_)
- Low 4ohm (typ), 7ohm (max) on-resistance (RON)
- Charge pump noise is 90μV (typ), charge pump enable
- No need for logic-level shifters for 1.4V or above
信号处理, 通信与网络, 便携式器材
(EN)
