The MAX4461TESA+ is a 3V/5V, single supply, rail to rail instrumentation amplifier in 8 pin NSOIC package. This instrumentation amplifier implements current feedback design to achieve a precision specification, low power consumption and excellent gain-bandwidth product. This new technique allows ground sensing capability combined with an ultra low input current and an increased common-mode rejection performance. The MAX4461 is offered in fixed gains of 10, uses ground as its reference voltage and has a logic-controlled shutdown input. It has a high impedance inputs optimized for small signal differential voltages and factory trimmed to gain of 10 with ±0.1% accuracy. Typical applications include strain gauge amplifier, transducer interface, precision low-side current sense, low noise microphone, preamplifier differential voltage amplification and battery-powered medical equipment.
- Supply voltage range is 2.85V to 5.25V
- Operating temperature range from -40°C to 85°C
- Quiescent current of only 700μA
- Shutdown feature to reduce the supply current to less than 1μA
- Input negative rail sensing
- Input bias current is 1pA
- 100μV input offset voltage
- Gain bandwidth product is 2.5MHz
- 18nV/√Hz input referred noise
信号处理, 传感与仪器, 工业
(EN)
