The MAX4128EUA+ is a dual, wide bandwidth, low power, single supply rail to rail I/O operational amplifier (op-amp) in 8 pin μMAX package. This device operate either in a single supply (+2.7V to +6.5V) or dual supplies (±1.35V to ±3.25V) with a common-mode voltage range that extends 250mV beyond VEE, VCC and capable of driving 250 ohm loads. This op-amp require only 650μA quiescent current per amplifier with its rail to rail input common-mode range and output swing, amplifier is ideal for low voltage, single supply operation. Although the minimum operating voltage is specified at 2.7V, the device typically operate down to 1.8V. In addition, low offset voltage and high speed makes it ideal signal-conditioning stages for precision, low voltage and data acquisition systems.
- Stable with 500pF capacitive loads
- Operating temperature range from -40°C to 85°C
- Stable at gains >= 10V/V
- No phase reversal for overdriven inputs
- Input offset voltage of 250μV
- Power supply rejection ratio of 100dB at VCC = 2.7V to 6.5V
- Slew rate of 10V/μs
- 25MHz gain bandwidth product
信号处理, 传感与仪器, 工业
(EN)
