The MAX3070EEPD+ is a ±15KV ESD protected, fail-safe, hot swap RS485/RS422 transceiver in 14 pin DIP package. This 3.3V transceiver has one driver and one receiver. It includes fail-safe circuitry which provides logic high receiver output when receiver inputs are open or shorted. The receiver provides logic high if all transmitters on a terminated bus are disabled (high impedance). The device includes a hot swap capability to eliminate false transitions on the bus during power-up or hot insertion. The MAX3070E has reduced slew rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables allowing error free data transmission up to 250Kbps. This transceivers draw 800μA of supply current when unloaded or when fully loaded with the drivers disabled. The MAX3070E has 1/8 unit load receiver input impedance allowing up to 256 transceivers on the bus. It is typically used in lighting systems.
Supply voltage range from 2.97V to 3.63V
Operating temperature range from -40°C to 85°C
Intended for full duplex communications
Ease of design and robust performance
±15KV human body model ESD on I/O pins
True fail-safe receiver while maintaining EIA/TIA-485 compatibility
