The MAX3054ASD+ is a ±80V fault protected/tolerant CAN transceiver in 14 pin NSOIC package. It is a interface between protocol controller and physical wires of bus lines in controller area network (CAN). The device provides differential transmit capability and switch to single mode if certain fault conditions occur. The MAX3054 provides full wake-up capability during failure modes. The extended fault protected voltage range of CANH and CANL bus lines of ±80V. Current limiting and thermal protection circuits protect the transmitter output stage against overcurrent faults to prevent destruction of transmitter output stage. The CANH and CANL lines are also protected against electrical transients that may occur in rugged environments. It provides three low power modes that can be entered and exited through active-low STB and EN pins. The MAX3054 is designed to provide optimal operation for specified data rate and it is ideal for high data rates of 250Kbps.
Supply voltage range from 4.75V to 5.25V
Operating temperature range from -40°C to 125°C
Low RFI/excellent EMC immunity
Bus failure management
Support single wire transmission mode with ground offset voltages up to 1.5V
Thermally protected
Do not disturb the bus line when unpowered
Low current sleep and standby mode with wake-up through bus lines
Pin and functionally compatible with TJA1054 device
(EN)
