The MAX1416EPE+ is a 16bit, Low power, 2-channel, sigma-delta analogue to digital converter (ADC) in 16 pin DIP package. This 2-channel (fully differential) serial output ADC uses a sigma-delta modulator with a digital filter to achieve 16bit resolution with no missing codes. It includes a PGA, an on-chip input buffer, an internal oscillator and a bidirectional communication port. The fully differential inputs, an internal input buffer and an on-chip PGA (gain = 1 to 128) allow low level signals to be directly measured, minimizing the requirements for external signal conditioning. A programmable digital filter allows for the selection of the output data rate and first notch frequency from 20Hz to 500Hz. This device is used in weigh scales, loop-powered systems, flow and gas meters, thermocouple measurements, RTD measurements and pressure transducers.
- Supply voltage range is 4.75V to 5.25V
- Operating temperature range from -40°C to 85°C
- Improve measurement quality with excellent DC accuracy & 0.0015% maximum INL with no missing codes
- Low power dissipation, 1.2mW (max) 3V supply & power-down current is 2μA (typ)
- Low system cost with integrated functionality, optional input buffers, 50Hz/60Hz rejection is > 98dB
- Increase system accuracy with built-in self calibration, user programmable offset & gain registers
- On-demand offset & gain self-calibration & system calibration, sampling rate is 500SPS
- Pin compatible upgrades for MX7705/AD7705
信号处理, 工业, 医用
