The MAX11646EUA+ is a low power, 1-channel/2-channel, 10bit analogue to digital converter (ADC) in 8 pin μMAX package. It has internal track/hold, voltage reference, clock and an I2C compatible 2-wire serial interface (400KHz fast mode, 1.7MHz high speed mode). The device operates from single supply of 4.5V to 5.5V. AutoShutdown powers down the device between conversions and reduces supply current to less than 1μA at lower throughput rates. It measures two single ended or one differential input. The fully differential analogue inputs are software configurable for unipolar or bipolar and single ended or differential operation. The full scale analogue input range is determined by internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX11646 has 4.096V internal reference. It is typically used in battery powered test equipment, power supply monitoring, solar powered remote systems, received signal strength indicators & system supervision.
- Throughput rate of 53Ksps (internal clock) and 94.4Ksps (external clock)
- Operating temperature range from -40°C to 85°C
- Power supply rejection ratio of ±0.01LSB/V
- 2-channel single ended or 1-channel fully differential inputs
- Internal FIFO with channel scan mode
- Low power (670μA at 94.4Ksps, 230μA at 40Ksps, 6μA at 1Ksps & 0.5μA in power down mode)
- Full power bandwidth (SINAD > 57dB) of 3MHz and full linear bandwidth (-3dB point) of 5MHz
- Relative accuracy of ±1LSB and DNL of ±1LSB (no missing codes over temperature)
- Offset error of ±1LSB and offset error temperature coefficient of 0.3ppm/°C (relative to FSR)
- Gain error of ±1LSB and gain temperature coefficient of 0.3ppm/°C (relative to FSR)
信号处理, 便携式器材, 医用
(EN)
