The LTC6992CS6-3#TRMPBF is a voltage-controlled Pulse Width Modulator that is easy-to-use. It is part of the TimerBlox? family of versatile silicon timing devices. A single resistor, RSET, programs the LTC6992's internal master oscillator frequency. The output frequency is determined by this master oscillator and an internal frequency divider, NDIV, programmable to eight settings from 1 to 16384. The LTC6992-3 will provide one-sided clamping and allows 0 to 95% duty cycle. When power is first applied, the power-on reset (POR) circuit will initiate the start-up time, tSTART. The OUT pin is held low during this time. The simplest and most accurate method to program the LTC6992 is to use a single resistor, RSET, between the SET and GND pins.
- Pulse width modulation (PWM) controlled by simple 0V to 1V analogue input
- Minimum duty cycle at 0 or 5%
- Maximum duty cycle at 95 or 100%
- 3.81Hz to 1MHz Frequency range
- Configured with 1 to 3 resistors
- <1.7% Maximum frequency error
- <3.7% Maximum PWM duty cycle error
- Frequency modulation (VCO) capability
- Single-supply operation
- 115μA Supply current at 100kHz
- 500μs Start-up time
- CMOS output driver sources/sinks 20mA
信号处理, 发光二极管照明, 便携式器材, 电源管理
