The LTC6902IMS#PBF is a Multi-phase Oscillator with spread spectrum frequency modulation that is easy to use. The oscillator frequency is set by a single external resistor (RSET). The LTC6902 also provides an optional spread spectrum frequency modulation (SSFM) capability that can be activated and controlled by an additional external resistor (RMOD). The LTC6902's master oscillator is controlled by the RSET resistor and has a range of 100kHz and 20MHz. In order to accommodate a wider output frequency range, a programmable divider (divide by 1, 10 or 100) is included. The integrated programmable multiphase circuit provides either 2, 3 or 4-phase waveforms. The LTC6902's SSFM capability modulates the oscillator's frequency by a pseudorandom noise (PRN) signal to spread the oscillator's energy over a wide frequency band. This spreading decreases the peak electromagnetic radiation level and improves electromagnetic compatibility (EMC) performance.
- 2, 3 or 4-phase outputs
- Optional spread spectrum frequency modulation for improved EMC performance
- 5kHz to 20MHz Frequency range
- One external resistor sets the frequency
- One external resistor sets percent frequency spreading
- 400μA Typical supply current (VS = 3V, 1MHz)
- <=1.5% Maximum frequency error (5kHz to 10MHz, TA = 25°C)
- <=2% Maximum frequency error (5kHz to 10MHz, TA = 0 to 70°C)
- ±40ppm/°C Temperature stability
- Fast start-up time (50μs to 1.5ms)
- 100R CMOS output driver
- Operates from a single-supply
时钟与计时, 便携式器材, 电源管理, 通信与网络, 消费电子产品, 信号处理
(EN)
