The LTC4058EDD-4.2#PBF is a complete constant-current/constant-voltage Linear Charger for single cell Li-ion batteries. It is designed to work within USB power specifications. The LTC4058 can Kelvin sense the battery terminal for more accurate float voltage charging. No external sense resistor or external blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature conditions. The charge voltage is fixed at 4.2V and the charge current is programmed with a resistor. The LTC4058 terminates the charge cycle when the charge current drops to 10% of the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the LTC4058 enters a low current state dropping the battery drain current to less than 2μA.
- No MOSFET, sense resistor or blocking diode required
- Thermal regulation maximizes charge rate without risk of overheating
- Battery kelvin sensing improves charging accuracy
- Charges directly from an USB port
- C/10 Charge termination
- Charge current monitor output for gas gauging
- Automatic recharge
- Charge status output
- AC Present output
- Soft-start limits inrush current
工业, 便携式器材, 电源管理, 通信与网络, 无线
(EN)
