The LTC4054LES5-4.2#PBF is a 150mA standalone linear Li-ion Battery Charger for single cell lithium-ion batteries. Its small size and ability to regulate low charge currents make the LTC4054L especially well-suited for portable applications using low capacity rechargeable lithium-ion coin cells. It is specifically designed to work within USB power specifications. No external sense resistor is needed and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to eliminate thermal overdesign. The charge voltage is fixed at 4.2V and the charge current can be programmed externally with a single resistor. The LTC4054L automatically terminates a charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the LTC4054L automatically enters a low current state, dropping the battery drain current to less than 2μA.
- Programmable charge current range (10 to 150mA)
- No external MOSFET, sense resistor or blocking diode required
- Constant-current/constant-voltage operation with thermal regulation
- Maximize charge rate without risk of overheating
- Charges single-cell Li-ion batteries directly from USB port
- Preset 4.2V charge voltage with ±1% accuracy
- Charge current monitor output for gas gauging
- Automatic recharge
- Charge status output pin
- C/10 charge termination
- 25μA Maximum supply current in shutdown mode
- 2.9V Trickle charge threshold
- Soft-start limits inrush current
电源管理, 便携式器材, 消费电子产品, 多媒体, 无线
