The LTC2945HMS-1#PBF is a wide range I2C power monitor in 12 pin MSOP package. This rail to rail system monitor measures current, voltage and power. It includes shunt regulator for supplies above 80V to allow flexibility in the selection of input supply. An onboard 0.75% accurate 12bit ADC measures load current, input voltage and an auxiliary external voltage. A 24bit power value is generated by digitally multiplying the measured 12bit load current and input voltage data. An overrange alert with programmable thresholds minimizes the need for software polling. An internal linear regulator allows the LTC2945-1 to operate directly from 4V to 80V rail or from an external supply voltage between 2.7V and 5.9V. Data is reported via a standard I2C interface and shutdown mode reduces power consumption to 20μA. The LTC2945-1 has an inverted data output for use with inverting opto isolator configurations.
Rail to rail input range from 0V to 80V
12bit resolution for current and voltages
Stores minimum and maximum values
Alerts when limits exceeded
Additional ADC input monitors an external voltage
Continuous scan and snapshot modes
Shutdown mode with quiescent current of less than 80μA
Internal multiplier calculates 24bit power value
Conversion time in snapshot mode is 33ms (VIN, ADIN)
(EN)
