The LTC2875IS8#PBF is a 25kV ESD high speed CAN Transceiver operating on 3.3 or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has been extended to 4Mbps to support high speed protocols based on the CAN physical layer. Enhanced ESD protection allows these parts to withstand ±25kV HBM on the transceiver interface pins without latch up or damage. Extended ±36V input common mode range and high common mode rejection on the CAN receiver provides tolerance of large ground loop voltages. A sophisticated CAN driver with active symmetry control maintains tight control of the common mode voltage for excellent electromagnetic emission, while the variable slew rate and split termination support allow additional EME reduction.
- Protected from overvoltage line faults to ±60V
- High speed operation up to 4Mbps
- ±25kV ESD interface pins, ±8kV all other pins
- Variable slew rate driver with active symmetry control & SPLIT pin for low electromagnetic emission
- Extended common mode range (±36V)
- Ideal passive behaviour to CAN bus with supply OFF
- Current limited drivers and thermal shutdown
- Power-up/down glitch-free driver outputs
- Micro power shutdown mode
- Transmit data (TXD) dominant timeout function
- DeviceNet compatible
- Up to MP-grade available (-55 to 125°C)
工业, 传感与仪器, 车用, 建筑自动化, 安全, HVAC, 医用
(EN)
