The LTC2380IMS-24#PBF is a 24bit low power SAR analogue to digital converter (ADC) with integrated digital filter in 16 pin MSOP package. This low noise, high speed ADC operates from single 2.5V supply and has ±VREF fully differential input range with VREF ranging from 2.5V to 5.1V. The LTC2380-24 consumes only 28mW and achieves ±3.5ppm INL maximum with no missing codes at 24bits. The device has an easy to use integrated digital averaging filter that can average 1 to 65536 conversion results in real time which dramatically improves dynamic range from 101dB at 1.5MSPS to 145dB at 30.5sps. It does not require separate programming interface or configuration register. The high speed SPI compatible serial interface supports 1.8V, 2.5V, 3.3V and 5V logic while also featuring daisy chain mode. The LTC2380-24 automatically powers down between conversions by reducing power dissipation at lower sampling rates.
- Maximum sampling frequency of 2MSPS
- Output data rate of 1.5MSPS
- Supply voltage range from 2.375V to 2.625V
- Typical INL of ±0.5ppm
- Typical THD of -117dB at fIN = 2KHz
- 50Hz/60Hz rejection
- Digital gain compression (DGC)
- Fully differential input range up to ±5V
- Operating temperature range from -40°C to 85°C
信号处理, 医用, 成像, 视频和目视, 工业, 自动化与过程控制
(EN)
