The LTC1563-2IGN#PBF is an extremely easy-to-use active RC, 4th Order Low-pass Filter with rail-to-rail inputs and outputs and low DC offset suitable for systems with a resolution of up to 16 bits. The LTC1563-2, with a single resistor value, gives unity-gain Butterworth response. The LTC1563-3, with a single resistor value, gives unity-gain Bessel response. The proprietary architecture of these parts allows for a simple resistor calculation - R = 10k (256kHz/fC), fC = cut-off frequency. For many applications, this formula is all that is needed to design a filter. By simply utilizing different valued resistors, gain and other responses are achieved. The LTC1563-X features a low power mode, for the lower frequency applications, where the supply current is reduced by an order of magnitude and a near zero power shutdown mode.
- Supports cutoff frequencies up to 360kHz using FilterCAD?
- Operates from a single 3V (2.7V minimum) to ±5V supply
- fC Accuracy <±2% (typical)
- DC offset <1mV
- Cascadable to form 8th order lowpass filters
通信与网络, 信号处理