The LTC1485CN8#PBF is a differential Bus Transceiver designed for multipoint data transmission standard RS485 applications with extended common-mode range (12 to -7V). It also meets the requirements of RS422. The CMOS with Schottky design offers significant power savings over its bipolar counterpart without sacrificing ruggedness against overload or ESD damage. The driver and receiver feature three-state outputs with the driver outputs maintaining high impedance over the entire common-mode range. Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit which forces the driver outputs into a high impedance state. I/O pins are protected against multiple ESD strikes of over ±10kV. The receiver has a fail-safe feature which guarantees a high output state when the inputs are left open.
ESD protection over ±10kV
Low power (ICC= 1.8mA typical)
28ns Typical driver propagation delays with 4ns skew
Designed for RS485 or RS422 applications
Single 5V supply
-7 to 12V Bus common-mode range permits ±7V ground difference between devices on the bus
Thermal shutdown protection
Power-up/down glitch-free driver outputs
Driver maintains high impedance in three-state or with the power off
Combined impedance of a driver output and receiver allows up to 32 transceivers on the bus
60mV Typical input hysteresis
Pin compatible with the SN75176A, DS75176A and SN75LBC176
(EN)
