The LT8300ES5#TRMPBF is a micropower isolated Flyback Converter with 150V/260mA switch. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Internal compensation and soft-start further reduce external component count. Boundary mode operation provides a small magnetic solution with excellent load regulation. Low ripple Burst Mode? operation maintains high efficiency at light load while minimizing output voltage ripple. A 260mA, 150V DMOS power switch is integrated along with all high voltage circuitry and control logic. It operates from an input voltages range of 6 to 100V and can deliver up to 2W isolated output power. The high level of integration and the use of boundary and low ripple burst modes result in a simple to use, low component count and high efficiency application solution for isolated power delivery.
260mA, 150V Internal DMOS power switch
Low quiescent current (70μA in sleep mode and 330μA in active mode)
Boundary mode operation at heavy load
Low-ripple Burst Mode? operation at light load
Minimum load <0.5% (typical) of full output
VOUT set with a single external resistor
No transformer third winding or opto-isolator required for regulation
(EN)
