LT6350CMS8#PBF - 

制造商：

LINEAR TECHNOLOGY LINEAR TECHNOLOGY

制造商产品编号：

LT6350CMS8#PBF

仓库库存编号：

2102657

技术数据表：

(EN)

The LT6350CMS8#PBF is a low noise single-ended to Differential Converter/ADC Driver featuring fast settling time. It converts high or low impedance, single-ended input signal to low impedance, balanced, differential output suitable for driving high performance differential successive approximation register (SAR) ADCs. The two operational amplifier topology features very low noise operational amplifier, that can support SNR >110dB in a 1MHz bandwidth. The input operational amplifier is trimmed for constant low input-referred voltage offset over the input range to prevent VOS steps from degrading distortion. On a single 5V supply, the outputs can swing from 55mV to 4.945V with the addition of a negative supply, the LT6350 can swing from 0 to 4.945V. Output common mode voltage is set by applying a voltage to the +IN2 pin. The LT6350 draws 4.8mA from a 5V supply and consumes just 60μA in shutdown mode.

• Rail-to-rail input and outputs
• Fast settling time (240ns, 0.01%, 8VP-P output step)
• 1.9nV/√Hz Input-referred operational amplifier noise
• High impedance input
• 33MHz Bandwidth (-3dB)
• No external gain resistors required
• 4.8mA Supply current
• Low power shutdown
• Low distortion
• Low offset voltage (±400μV maximum)

• High DC linearity (<±1LSB, 16-bit, 8VP-P)
• Low input current noise (1.1pA/√Hz)