DC1923A - 

制造商：

LINEAR TECHNOLOGY LINEAR TECHNOLOGY

制造商产品编号：

DC1923A

仓库库存编号：

2393769

技术数据表：

(EN)

The DC1923A demonstration board features LTC3129-1 DC to DC converter. The LTC3129-1 is a high efficiency, 200mA buck boost DC to DC converter with a wide VIN and VOUT range. The DC1923A demonstration board has two user selectable operating modes, burst mode operation and fixed frequency PWM (JP3). There is also an accurate programmable RUN pin which is used to ENABLE the converter (JP1). The LTC3129-1 also incorporates a maximum power point control function which can be enabled (JP2) for applications where the input source is a solar cell or is high impedance, such as intrinsically safe applications or high ZOUT thermal electric generators. The LTC3129-1 also features fixed output voltages with eight user selectable settings (JP4, JP5, JP6). This allows the user to eliminate the output voltage divider and the associated bias current. The DC1923A operates with a 2.42V to 15V input voltage range and has been designed with the output voltage set to 5V.

• Regulates VOUT above, below or equal to VIN
• Single inductor
• 1.3μA quiescent current
• Programmable maximum power point control
• 1.2MHz ultralow noise PWM
• Current mode control
• Pin selectable burst mode operation
• Accurate RUN pin threshold
• Power good indicator
• 10nA shutdown current