C1210X106K3RACTU - 

制造商：

KEMET KEMET

制造商产品编号：

C1210X106K3RACTU

仓库库存编号：

2665774

技术数据表：

(EN)

The Kemet C series flexible termination system (FT-CAP) commercial grade multilayer ceramic chip capacitors are X7R dielectric material which exhibits no change in capacitance with respect to time and voltage. MLCCs are monolithic device consists of laminated layers of specially formulated, ceramic dielectric materials interspersed with a metal electrode system. The layered formation is then fired at high temperature to produce a sintered and volumetrically efficient capacitance device. These FT-CAP multilayer ceramic capacitors in X7R dielectric incorporates a unique, flexible termination system integrated with standard termination. This technology was developed to address primary failure mode of MLCCs such as flex cracks which results excessive tensile and shear stresses produced during board flexure and thermal cycling. FT-CAP technology inhibits the transfer of board stress to rigid ceramic body therefore mitigating flex cracks which can result in low IR or short circuit failures.

• Capacitance range includes E24 decade values from 180pF to 22μF
• EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 case sizes available
• DC voltage rating of 6.3V to 250V
• High temperature range of -55°C to 125°C
• High capacitance flex mitigation, superior flex performance up to 5mm
• Capacitance tolerances of ±5%, ±10% and ±20%
• Non polarity device, minimize installation concerns