The MKE06Z128VLK4 is a 32-bit Kinetis KE02 Robust Microcontroller based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 48MHz. The device incorporates 128kB internal flash, 16kB internal RAM, one 12-bit SAR A/D converter, two 6-bit D/A converter and 71 general-purpose I/O pins. This device also features communication interfaces like three UART modules, two SPI modules and two I2C module.
Single cycle 32 x 32-bit Multiplier
Single cycle I/O access port
Oscillator (OSC) - Supports 32.768kHz crystal or 4MHz to 24MHz crystal or ceramic resonator
Internal clock source (ICS)
Internal 1kHz Low-power oscillator (LPO)
Power management module (PMC) with three power modes - run, wait, stop
Low-voltage detection (LVD) with reset or interrupt, selectable trip points
Watchdog with independent clock source (WDOG)
Programmable cyclic redundancy check module (CRC)
Serial wire debug interface (SWD)
Aliased SRAM bit band region (BIT-BAND)
Bit manipulation engine (BME)
80-bit Unique identification (ID) number per chip
Two 32-bit Keyboard interrupt modules (KBI)
External interrupt (IRQ)
Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
(EN)
