The MK26FN2M0VLQ18 is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 180MHz. The device incorporates 2048kB internal flash, 256kB internal RAM, two 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, four I2C modules and one I2S module.
ARM Cortex-M4 based core with DSP instructions and single precision floating point unit
FlexBus external bus interface and SDRAM controller
Four analog comparators (CMP) containing a 6-bit DAC and programmable reference input
1.2V Voltage reference
USB High-/full-/low-speed On-the-Go with on-chip high speed transceiver
USB Full-/low-speed OTG with on-chip transceiver
Secure digital host controller (SDHC)
Multiple low-power modes to provide power optimization based on application requirements
Memory protection unit with multi-master protection
3 to 32MHz main crystal oscillator and 32kHz low power crystal oscillator
48MHz Internal reference
Hardware random-number generator
Supports DES, AES, SHA accelerator (CAU)
Multiple levels of embedded flash security
4 Periodic interrupt timers
16-bit Low-power timer
Two 16-bit Low-power timer PWM modules
Two 8-channel Motor control/general purpose/PWM timers
