The ATTINY13V-10SU is a low-power 8-bit CMOS Microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny13 achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The AVR core combines a rich instruction set with 32 general purpose working registers. All 32 registers are directly connected to the arithmetic logic unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers. The ATtiny13 provides 1kB ISP flash memory, 64B SRAM, 64B EEPROM, a 32B register file and a 4-channel 10-bit A/D converter. The device supports a throughput of 10MIPS at 10MHz.
Advanced RISC architecture
120 Powerful instructions most single clock cycle execution
32 x 8 General purpose working registers
Fully static operation
Up to 20MIPS throughput at 20MHz
One 8-bit timer/counter with prescaler and two PWM channels
4-channel, 10-bit ADC with internal voltage reference
Programmable watchdog timer with separate on-chip oscillator
On-chip analog comparator
DebugWIRE on-chip debug system
In-system programmable via SPI port
External and internal interrupt sources
Low power idle, ADC noise reduction and power-down modes
Enhanced power-on reset circuit
Programmable brown-out detection circuit with software disable function
(EN)
