The EVAL-AD9837SDZ is an evaluation board for the AD9837 low power, 8.5mW, programmable waveform generator. The AD9837 is a 16MHz low power DDS device capable of producing high performance sine and triangular outputs. It also has an on board comparator that allows a square wave to be produced for clock generation. The EVAL-AD9837SDZ board is used in conjunction with a EVAL-SDP-CB1Z SDP board available from Analog Device's Inc. The USB-to-SPI communication to the AD9837 is completed using this blackfin-based development board. A high performance, on board 16MHz trimmed general oscillator is available to use as the master clock for the AD9837 system. Various links and SMB connectors are also available on the EVAL-AD9837SDZ board to maximize usability.
- Full featured evaluation board for the AD9837 evaluation board
- Graphical user interface software for board control and data analysis
- Connector to EVAL-SDP-CB1Z system demonstration platform (SDP) board
- Various power supply and reference link options
- Digitally programmable frequency and phase
- It provides 8.5mW power consumption at 2.3V
- It has 28bit resolution of 0.06Hz at 16MHz reference clock
- 3 wire SPI interface and power down option
医用, 工业, 测试与测量, 传感与仪器
(EN)
